Kepler Pro 15.6"

Especificaciones técnicas

Pantalla:   15.6" (39.6 cm) Full HD (1920 x 1080) Non - Glare IPS with NVIDIA® G-SYNC Model

The Maximum opening angle of the display is approximately 115°.

Chipset:   Mobile Intel Z170 Express

Procesador:    The Kepler Pro 15.6" supports the following desktop LGA 1151

Intel Core i5-6600 | 4 Core | 4 Threads | 3.3 - 3.9GHz | TDP: 65 Watt

Intel Core i5-6600K | 4 Core | 4 Threads | 3.5 - 3.9GHz | TDP: 91 Watt

Intel Core i7-6700 | 4 Core | 8 Threads | 3.4 - 4.0GHz | TDP: 65 Watt

Intel Core i7-6700K | 4 Core | 8 Threads | 4.0 - 4.2GHz | TDP: 91 Watt

Tarjeta Gráfica:   In The Kepler Pro 15.6" the following graphics cards are available:

NVIDIA® GeForce® GTX 1060 6144 MB GDDR5 VRAM

NVIDIA® GeForce® GTX 1070 8192 MB GDDR5 VRAM

Features: DirectX® 12, OpenGL 4.4, NVIDIA® G-SYNC, NVIDIA® CUDA, NVIDIA PhysX™, OpenCL

The Notebook does not support NVIDIA Optimus. The internal and external graphics output is directly from the NVIDIA graphics card.

The following are the maximum supported resolutions:

Internal: 3840 x 2160 @60Hz (depending on the display selected) 2 x Mini DisplayPort 1.3: 2 x 3840 x 2160@60 Hz or 2560 x 1600 @120 Hz

HDMI 2.0: 3840 x 2160 @60Hz or 2560 x 1600 @120Hz

A maximum of 4 displays can be driven simultaneously: 1x internal und 3x external. When using lower resolutions (i.e. Full-HD) more screens can be simultaneously driven by DaisyChaining via DisplayPort. The Thunderbolt port (integrated in the USB Type-C port) can also provide a DisplayPort signal by changing a setting in the Notebook BIOS. With this setting enabled, the right displayport is disabled (when viewed from behind). In our FAQ there is more informatoin about external displays, and Multi-Monitor-Mode and operation of 120 Hz displays.

MEMORY   4 x 260 Pin DDR4 SO-DIMM Sockets Dual Channel, up to 64 GB of upgradeable memory SSDS 2 x m.2 2280 SSD via SATA - III or PCI - Express x 4 Both m.2 slots can be operated as RAID 0/1 in both SATA and PCI Express mode.

HARD DRIVES 2 x 2.5" ( 7-9,5 mm ) SSD/HDD, SATA - III Both HDD slots can also be operated as RAID 0/1.

AUDIO High Definition Audio Codec ONKYO Stereo-speakers + Subwoofer Integrated Microphone 5.1-Sound external outputs Optical S/PDIF-outputSound Blaster® X-FI® MB5 Additional features for Stereo Headphones: "ESS Sabre" DAC & "Texas Instruments Burr-Brown" amplifier for brilliant and crystal clear Headphone sound (up to 600 Ohm, 24 bit, 192 Khz)

KEYBOARD   Multicoloured LED Backlit Keyboard with three configurable lighting zones, numeric keypad and N-Key Rollover

TOUCHPAD Touch Pad with Multi-gesture, scroll function and two soft-touch buttons

CONNECTIVITY1 x USB 2.0 3 x USB 3.0 (1 x powered USB port, AC/DC)1 x USB 3.1 Gen2 (Type-C)1 x USB 3.1 Gen2 / Thunderbolt™ 3 combo port (Type-C)2 x Mini DisplayPort 1.31 x HDMI 2.0 (with HDCP)1 x 2-in-1 Audio (headphone output + optical S/PDIF)1 x Microphone input1 x Line-out1 x Line-in1 x RJ-45 LAN

CHASSIS   The Kepler Pro 15.6" chassis is designed for easy maintenance. On the bottom there is a removable panel which when removed gives direct access to the cooling system and the underlying CPU socket. Next to it are two RAM slots, the wireless module and the CMOS battery. The other two RAM slots are located under the keyboard. There is a second smaller panel which gives access to both hard drive and m.2 SSD slots. Hard drive, SSD and RAM upgrades are easy to carry out. The battery is removable and can be replaced quickly if necessary. The Kepler Pro 15.6" chassis is designed so that it can efficiently dissipate heat from the desktop processor and the graphics card. Thus it is possible, because of this design both the processor and graphics card are able to run at very high utlisation rates for long periods whilst maintaining low temperatures for the class of notebook. For permanent trouble-free operation, it is advisable to clean the fans and heatsinks at least twice a year to remove any dust. The CPU and GPU heatpipes are partially interconnected. This has the advantage that even with unilateral load (i.e Only CPU load), both fans will be active. The Kepler Pro 15.6" has an intelligent and manually adjustable fan control, so that quiet operation is ensured in office use. While other high-performance notebooks are becoming thinner the cooling and performance of the components often suffers. The Kepler Pro 15.6" is based on a contemporary interpretation of the classic gaming notebook. By opting for desktop CPUs, the Kepler Pro 15.6" offers unparalleled flexibility and high performance. With a thickness of only 38mm and weighing only 3.4kg it is still mobile enough for outdoor use. The stable, torsion-resistant chassis and the high quality of the components used to make the Kepler Pro 15.6" means it is the ultimate all-round notebook for gamers and demanding professional users.

SECURITY    Kensington lock, TPM 2.0, Fingerprint Reader

COMMUNICATION   10 / 100 / 1000 Mbit / s Base - TX Killer™ E2400 Gigabit Ethernet LAN, WLAN 802.11a / b / g / n /ac + Bluetooth 4.0 (optional), UMTS/LTE (optional), 2.0 MP Webcam, integrated microphone

DIMENSIONS   386 x 262 x 38 mm (W x D x H) WEIGHT   3.4kg

BATTERY  Lithium-Ion-Battery, 82Wh (around 2hrs general usage) The relatively low battery life is because of the relatively high power consumption of the desktop processor and because the Notebook does not support NVIDIA Optimus.

POWER SUPPLY With GTX 1060: 230W PSU Dimensions 175 x 85 x 35 mm (L x W x H)Weight: 0.9 kgTotal cable length (from outlet to notebook): 3.6m With GTX 1070 or for CPU/GPU-Overclocking: 330W PSU Dimensions 200 x 100 x 44 mm (L x W x H)Weight: 0.9 kgTotal cable length (from outlet to notebook): 3.6 m.

Portátiles Anauta Kepler Pro 15.6"

Gran potencia, para todos los usos, CGI, Vfx, Diseño 3D, CAD.