Kepler Pro 17.3"
17.3 (43.9 cm) Full HD (1920 x 1080) Non-Glare IPSModel: LG LP173WF4-SPD1
17.3 (43.9 cm) WQHD (2560 x 1440) Non-Glare 120Hz 5msModel: EDP AU B173QTN01.0
The Maximum opening angle of the display is approximately 115°.
Chipset: Mobile Intel Z170 Express
Pocesador: The Kepler Pro 17 de Anauta supports the following desktop LGA 1151 Processors:
Intel Core i5-6600 | 4 Core | 4 Threads | 3.3 - 3.9GHz | TDP: 65 Watt
Intel Core i5-6600K | 4 Core | 4 Threads | 3,5 - 3.9GHz | TDP: 91 Watt
Intel Core i7-6700 | 4 Core | 8 Threads | 3.4 - 4.0GHz | TDP: 65 Watt
Intel Core i7-6700K | 4 Core | 8 Threads | 4.0 - 4.2GHz | TDP: 91 Watt
Tarjeta Gráfica: In The Kepler Pro 17" de Anauta the following graphics cards are available:
NVIDIA® GeForce® GTX 1060 6144 MB GDDR5
NVIDIA® GeForce® GTX 1070 8192 MB GDDR5
NVIDIA® GeForce® GTX 1080 8192 MB GDDR5
Features: DirectX® 12, OpenGL 4.4, NVIDIA® Optimus, NVIDIA® CUDA, NVIDIA PhysX™, OpenCLThe Notebook does not support
NVIDIA Optimus. The internal and external graphics output is directly from the NVIDIA graphics card.
The following are the maximum supported resolutions:
Internal: 3840 x 2160 @60Hz (depending on the display selected)2x Mini DisplayPort 1.3: 2x 3840 x 2160@60Hz or 2560 x 1600 @120HzHDMI 2.0: 3840 x 2160 @60Hz or 2560 x 1600 @120HzA
maximum of 4 displays can be driven simultaneously: 1 x internal und 3 x external. When using lower resolutions (i.e. Full-HD) more screens can be simultaneously driven by Daisy Chaining via Display Port. The Thunderbolt port (integrated in the USB Type-C port) can also provide a Display Port signal by changing a setting in the Notebook BIOS. With this setting enabled, the right displayport is disabled (when viewed from behind). In our FAQ there is more informato in about external displays, and Multi-Monitor-Mode and operation of 120 Hz displays.
Memoria: 4 x 260 Pin DDR4 SO-DIMM Sockets Dual Channel, up to 64 GB of upgradeable memory SSDS2x m.2 2280 SSD via SATA-III or PCI-Express x4 Both m.2 slots can be operated as RAID 0/1 in both SATA and PCI Express mode.
Almacenamiento: 2 x 2,5" (7-9,5 mm) SSD/HDD, SATA-III Both HDD slots can also be operated as RAID 0/1.
Audio: High Definition Audio Codec ONKYO Stereo Speakers & SubwooferIntegrated MicrophoneConnectors for external 5.1-SoundOptical S/PDIF outputSound Blaster® X-FI® MB5 Additional features for Stereo Headphones: "ESS Sabre" DAC & "Texas Instruments Burr-Brown" amplifier for brilliant and crystal clear Headphone sound (up to 600 Ohm, 24 bit, 192Khz)
Teclado: Multicoloured LED Backlit Keyboard with three configurable lighting zones, numeric keypad and N-Key Rollover
Touchpad: Touch Pad with Multi-gesture, scroll function and two soft-touch buttons
Conectividad: 4 x USB 3.0 (1 x powered USB port, AC/DC)1 x USB 3.1 Gen2 (Type-C)1 x USB 3.1 Gen2/Thunderbolt 3 combo port (Type-C)2 x Mini DisplayPort 1.31 x HDMI 2.0 (with HDCP)1 x 2-in-1 Audio (Headphone out + Optical S/PDIF)1 x Integrated Microphone1 x Line-out1 x Line-in1 x RJ-45 LAN
Chasis: The Kepler Pro 17.3" chassis is designed for easy maintenance. On the bottom there is a removable panel which when removed gives direct access to the cooling system and the underlying CPU socket. In addition, there are two of four RAM slots, an m.2 SSD slot and the CMOS battery. The hard drives and other slots are accessible from a smaller service panel. Hard drive, SSD and RAM upgrades are easy to carry out. The battery is removeable and can be exchanged quickly. The Kepler Pro 17.3" chassis is designed so that it can efficiently dissipate heat from the desktop processor and the graphics card. Thus it is possible, Because of this design both the processor and graphics card are able to run at very high utlisation rates for long periods whilst maintaining low temperatures for the class of notebook. For permanent trouble-free operation, it is advisable to clean the fans and heatsinks at least twice a year to remove any dust. The CPU and GPU heatpipes are partially interconnected. This has the advantage that even with unilateral load (i.e Only CPU load), both fans will be active. The Kepler Pro 17.3" has an intelligent and manually adjustable fan control, so that quiet operation is ensured in office use. With the Kepler Pro 17.3" we go against the miniaturization trend. In its maximum configuration, the new NVIDIA GeForce GTX 1080 is available. By opting for desktop CPUs, the Kepler Pro 17.3" offers unparalleled flexibility and high performance. With a height of just 40.9mm and weighing only 3.9kg weight it is still mobile enough for outdoor use. The stable, torsion-resistant chassis and the high quality of the components used makes the Kepler Pro 17.3" the ultimate desktop replacement for gamers and demanding professional users.
Seguridad: Kensington lock, TPM 2.0, Fingerprint-Reader
Comunicación: 10 / 100 / 1000 Mbit/s Base - TX Killer™ E2400 Gigabit Ethernet LANWLAN 802.11a / b / g / n / ac + Bluetooth 4.02.0 MP WebcamIntegrated Microphone
Dimensiones: 418 x 295.3 x 40,9 mm (B x W x H) Peso: 3.9kg
Bateria: Lithium-Ion-Battery, 82Wh (around 2hrs general usage) The relatively low battery life is because of the relatively high power consumption of the desktop processor and because the Notebook does not support NVIDIA Optimus.
Alimentación: 330W PSU Dimensiones: 200 mm x 100 mm x 44 mm Peso: 0,9 kg Longitud total del cable (del enchufe al notebook): 3.6 m